上海EV-S90S90PS90/EV-RS90S90PS90 Electric car charging cable

EV-S90S90PS90/EV-RS90S90PS90                    

450/750V Electric car charging cable

Product application

This product is mainly used to connect the cable between electric vehicle and charging equipment, electric vehicle charging equipment and charging port, or the vehicle charge and discharge early warning control system with the function of control signal transmission for charging saturation, safety warning and other aspects.

Product structure

Reference standard :GB/T33594-2017

Guide body: multi-strand fine copper wire, in accordance with GB/T3956-2008 standard requirements

EV-S90S90PS90: The fifth conductor

EV-RS90S90PS90: sixth conductor

Insulation material: TPE

Specifications: Main insulated core: 1.0 to 70mm2

Signal or control core: 0.5 to 1.5mm2

Signal or control core shielding (optional) : (tinned) copper wire braided, braided density ≥80%

Filling (optional) : Mesh polypropylene filling or cotton filling

Inner sheath: TPE

Total shielding: (tinned) copper wire braid, braid density ≥80%

Sheath material: TPE

Jacket color: RAL2003 Orange or other custom color

Insulation color:

Two cores: blue, brown

Three core: yellow/green, blue, brown

Four core: yellow/green, brown, black, gray

Five core: yellow/green, blue, brown, black, gray

Signal or control core color may be numerically numbered

Technical parameter

Rated voltage: AC AC :450/750V and below

Rated temperature: -40℃ ~+90℃

Pressure test: 3500V/15min

Spark test: ≥4KV

Minimum bending radius:

Fixed installation: 4X cable OD

Mobile installation: 6X cable OD

Environmental requirements: Meet RoHS REACH environmental requirements

Flame retardant properties: in accordance with GB/T18380.12/22-2008, no delay test

Product characteristics

UV resistant, easy to install and use

Good oil resistance (mineral oil, fuel oil, gasoline resistance)

The cable has certain softness and cold resistance, and can withstand certain external mechanical force, so that the cable is not afraid of bending, and it is more convenient to install and lay

The above data is for reference only. If the signal or control core is required, you can request to develop and customize it